| Customization: | Available |
|---|---|
| Type: | Socket Terminals |
| Material: | Copper |
|
Still deciding? Get samples of US$ 3.68/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Contact impedance | |
| Insulation resistance | |
| Voltage resistance | |
| Environmental protection |
1. Basic Information
Model: 2.00PH 180° Straight 2*3 Dual Row Block Terminals
Type: Straight 2*3 Dual Row Block Terminals
Angle: 180° (may refer to the installation angle of the terminal block or the bending angle of the pins)
Number of rows/pins: 2 rows, 3 pins per row (total 6 pins)
2. Physical Characteristics
Pin spacing: Since the "2.00" in "2.00PH" may refer to the pin spacing (but usually the pin spacing is measured in millimeters, e.g., 2.00mm), it is assumed here that it is 2.00mm (specifics need to be confirmed in accordance with the product specification).
Pin type: straight insertion type, may come with pre-molded pins or require the user to install the pins.
Insulator Material: Usually flame retardant, high temperature resistant plastic material, such as nylon (PA), polybutylene terephthalate (PBT), etc.
Color: Usually natural or black, but other color options may be available depending on the manufacturer.
3. Electrical Characteristics
Rated Current: To be determined from product specifications and may vary depending on material, size and application environment.
Rated Voltage: Again refer to the product specification, usually related to the electrical properties of the insulator material.
Contact Resistance: Low contact resistance to ensure a good electrical connection.
Insulation resistance: High insulation resistance to prevent electrical short circuits.
4. Areas of application
This product is suitable for use in electronic devices that require double-row pin connections, such as connections between circuit boards (PCBs), interfaces between modules, and so on.
Widely used in communications, industrial control, automotive electronics, medical equipment and other fields.
5. Caution
When purchasing and using, make sure that the product's specification parameters (e.g., pin spacing, number of pins, electrical performance, etc.) meet the design requirements.
Observe the manufacturer's installation and use guidelines to ensure proper installation and use.
Pay attention to the storage and transportation conditions of the product to avoid damage to the pins or insulators.
){kind=link}