Product description:
| Contact impedance |
|
| Insulation resistance |
|
| Voltage resistance |
|
| Environmental protection |
|
1. Basic Information
Model/Specification: This is a double row inline pin header with specific pin spacing and pin configuration.
Pin spacing: PH4.2, usually means that the distance from the center of the pin to the center is 4.2mm (but please note that the "PH" here is not always directly equivalent to the number of millimeters of the pin spacing, the specific need to refer to the manufacturer's instructions).
Pin Configuration: 2*3P, i.e. double rows, 3 pins per row, total 6 pins.
Color: black, the color of the insulator.
Pin type: straight, meaning that the pins are perpendicular to the bottom of the insulator and are used to insert into the holes of the circuit board (PCB).
2. Physical Characteristics
Insulator Material: Flame retardant, high temperature resistant plastic material.
Pin Material: Usually copper alloy or copper plated to provide good electrical conductivity and mechanical strength.
Pin Arrangement: Double-row in-line type with pins arranged in parallel.
3. Electrical Characteristics
Rated current/voltage: These parameters are to be determined by reference to the product specification and may vary by manufacturer and specific model.
Contact resistance: Low contact resistance to ensure good electrical connection.
Insulation Resistance: High insulation resistance to prevent electrical short circuit.
4. Areas of application
This product is suitable for use in electronic equipment requiring a double-row pin connection with a pin pitch of 4.2mm (or similar size), such as connections between circuit boards, interfaces between modules, etc. Specific areas of application depend on the design of the product and the manufacturer's recommended applications.
5. Caution
When purchasing and using the product, make sure that the product's specification parameters (e.g., pin spacing, number of pins, electrical performance, etc.) meet the design requirements.
Observe the manufacturer's installation and use guidelines to ensure proper installation and use.
Pay attention to the storage and transportation conditions of the product to avoid damage to the pins or insulators.
){kind=link}